MANUFACTURING

Manufacture of PVC films Clarity located on the territory of Russia and meets the highest requirements of international standards in the field of food packaging.

Start of production - autumn 2013

The design capacity of 10,000 tons per year.

Compliance requirements of EU Regulation 10/2011 and FDA standarts

Characteristics
of CLARITY`s
PVC films

Today Clarity produces a range of standard sizes, and also carries out individual orders for the production of stretch PVC films.

Characteristics of the produced PVC films:

Thickness	from 7 to 28 µm
Width	from 280 up to 500 mm

The PVC film with full color flexographic printing

Food stretch film PVC "CLARITY" with full-color printing is the best method of obtaining consumer loyalty in retail enables you to increase brand awareness, increase the number of repeat purchases, it is profitable to differentiate their products on the shelf against the competitors, to place all the necessary information about the manufacturer and the brand.

To order food stretch PVC film "CLARITY" with full color printing , just contact our specialists, You will receive a detailed consultation, assistance in the development and creation of the design (model) the selection of the optimal film size and pitch of picture.

Сast technology

The CAST extrusion line, in this case, the molten material is extruded from the extrusion head with a straight crevice on the steel cooled drum of large diameter, which is a rapid cooling and the formation of the thickness and width of the film . Films produced on these lines, often referred to as CAST films, they are the best material for manual packing. Distinguishing characteristics from the point of view of the consumer, is transparency and gloss, tactile softness and superior adhesion. In fact, the packing product rolled by hand on hot table is not inferior to the tension and quality of the packaging folded on automatic equipment. Efficiency (from the point of view of quantities and prices) and appearance superior to similar packaging on automatic machines

Blown technology

BLOWN extrusion lines, the melt is extruded in the form of a bubble tubular shaped head with a slit in the form of a ring. The shape and cooling of the bubble is provided by a flow of air inside and air outside. Air cooling is slower than in the first case, does not allow to achieve that level of gloss, transparency and softness of the film as in the case of СAST films. Therefore, BLOWN film lose competition CAST films in the fight for consumer preferences using manual type of packing. However, the increased durability of the BLOWN two-layer films makes them an option for uncompromising use on high speed automatic packaging lines.

Environmentally friendly raw materials

The formulation of manufacturing is based on a special plasticizer from vegetable raw materials, so the migration of harmful substances from the film in the packaged product is missing